SOLUTIONS • PUMPING SOLUTIONS, POWERING TRUST
PPS980-540
Optimized hydraulics for maximum efficiency and low operating costs.
Robust design with premium materials for long service life.
Suitable for water supply, HVAC, irrigation, and industrial processes.
Back pull-out design for quick inspection and maintenance.
| PUMP SIZE | L | B | H | a | f | w | s | h1 | h2 |
|---|---|---|---|---|---|---|---|---|---|
| 32-160 | 685 | 320 | 430 | 80 | 385 | 220 | 260 | 140 | 290 |
| 50-200 | 780 | 360 | 480 | 80 | 430 | 250 | 300 | 160 | 320 |
| 80-200 | 840 | 400 | 540 | 95 | 470 | 280 | 340 | 180 | 360 |
| 100-250 | 1020 | 490 | 640 | 110 | 570 | 320 | 400 | 200 | 440 |
| 150-315 | 1250 | 600 | 780 | 130 | 700 | 380 | 480 | 240 | 520 |
Note: Dimensions are approximate. Contact POWER PUMP SOLUTIONS for certified drawings.
| NO. | PART | STANDARD MATERIAL | OPTIONAL MATERIAL |
|---|---|---|---|
| 1 | Casing | Cast Iron (EN-GJL-250) | Ductile Iron / SS 316 |
| 2 | Impeller | Cast Iron (EN-GJL-250) | Bronze / SS 316 |
| 3 | Wear Ring | Brass | SS 316 |
| 4 | Shaft | Stainless Steel (AISI 420) | AISI 431 / SS 316 |
| 5 | Shaft Sleeve | Stainless Steel (AISI 304) | SS 316 |
| 6 | Mechanical Seal | Carbon/Ceramic/NBR | SiC/SiC/Viton |
| 7 | Lantern Ring | Cast Iron | SS 316 |
| 8 | Bearing Housing | Cast Iron | Ductile Iron / SS 316 |
| 9 | Bearing | Deep Groove Ball Bearing | - |
| 10 | Base Plate | Mild Steel | Stainless Steel |
| 11 | Coupling | Flexible Coupling | - |
| 12 | Motor | TEFC, IP55, Ins. Class F | - |
| 13 | Terminal Box | Cast Iron | - |
| 14 | Drain Plug | Brass | SS 316 |
* Materials can be adjusted as per application requirement.
| Pump Type | Horizontal Single Stage End-Suction Centrifugal Pump |
|---|---|
| Flow Rate (Capacity) | 5 – 1,200 m³/h |
| Maximum Flow | Up to 1,500 m³/h (model dependent) |
| Head Range | 10 – 160 m |
| Maximum Working Pressure | 16 bar (PN16) / Optional 25 bar (PN25) |
| Liquid Temperature | -10 °C to +120 °C (Standard) Up to +180 °C with special seals |
| Maximum Ambient Temp | 40 °C |
| Speed | 1,450 / 2,900 RPM (50 Hz) |
| Motor Power | 0.37 – 315 kW |
| Efficiency | Up to 88% |
| Suction Size | DN32 – DN300 |
| Discharge Size | DN25 – DN250 |
| Seal Type | Mechanical Seal / Gland Packing |
| Protection Class | IP55 |
| Insulation Class | F |
| Frequency | 50 / 60 Hz |
| Voltage | 380 – 415V / 3 Phase (Other voltages optional) |
| Maximum Solid Content | < 0.2% (Clean Liquids) |
| Liquid Type | Clean Water, Hot Water, Cooling Water, Light Chemicals |
* Curves are for reference only. Actual performance may vary by model and speed.